Category Archives: Uncategorized

How can I get natural gas in my home?

gas powered stove burner

Is natural gas a liquid?

Many people like having an all-electric home and others like to have both electric and natural gas energy power in their home. Sometimes we have a choice, sometimes we have to work with whatever type of energy is in the house. If you have the choice between all-electric, natural gas or propane, which is your preference?  If you prefer Natural gas, line installation may be possible, you’ll just need to do some investigating and researching.

Yes, and no. What consumers use as a natural gas isn’t how it comes out of the ground when drilled, natural gas is primarily composed of methane. However, raw natural gas originates from three kinds of wells: oil wells, gas wells, and condensate wells that then goes through a processing that separates the various fluids and hydrocarbons from the pure natural gas. This process gives us the “dry” natural gas we use in our homes and businesses with the natural gas line installations.   

How safe is natural gas in the home?       

Natural gas line installation and use is an efficient and safe source of power when used correctly. Yes, there is a potential for fires, and it can be poisonous when inhaled. So can other forms of energy sources like electricity and gasoline. Natural gas isn’t any more dangerous than those other forms of energy, and you can purchase a natural gas detector for the home that will alert you when there is a natural gas leak. 

Is natural gas heating dangerous?

We use natural gas line installation for heating most homes in this country, commonly with a gas boiler or gas furnace. Yet, there is still a high level of caution and concern when a heat source is gas-powered. There is a fear of exhausts and explosions, yet no fear of electric heat and fires.

Natural gas line installation and the gas heaters made today operate with a very minimal danger level. The biggest concern to have when using natural gas heat is carbon monoxide leaks. Carbon monoxide, a byproduct of the combustion of gas, is toxic, but because they design furnaces to vent through a flue, the chance of it leaking into the home is slim. 

Even though gas boilers and furnaces made today are held to high safety standards, and they hold Natural gas line installation to strict safety standards and environmental standards, when maintenance or the boiler or furnace is ignored, they can become unsafe quickly and with little warning. The older a gas heater, the more likely the chance of carbon dioxide escaping. Therefore, experts and professional recommend having your gas heating inspected once a year and perform regular maintenance yourself, or have maintenance performed on a monthly basis.

What natural gas is used in homes?

A home that has natural gas installation, the gas is delivered through pipelines or tanks deliver it as compressed natural gas). Most of the natural gas installation that is consumed in homes is for space heating and water heating. We also use it for powering clothes dryers, light fixtures, ovens, stoves, and other appliances.

gas pipeline

How do you find out if I can get natural gas?

As we have discussed it, gas is the least expensive energy source, but for some homeowners, their homes are set up as all-electric when they move in. So, does this mean that electricity is the only option they have? This depends on their property and some important things that must be considered:

  • Check with the local municipality if natural gas installation is available to your house.
  • Call the local natural gas company, in the case of Mesquite Texas, that would be Atmos Energy.
  • How close is the nearest natural gas line?
  • Has the property ever had natural gas installation?
  • Do any of the neighbors have natural gas installation?

Once you have confirmed there is natural gas installation available to your home, there is more than just plugging in a toaster. The following steps will need to be followed to assure the gas is run properly, connected to your home correctly, and there are no leaks. 

Schedule Natural Gas Installation Service

Next, the local natural gas company will come locate the underground lines for all utilities to your home and mark them. They will then layout the best way for the natural gas lines to be laid to service your home. They will install a gas meter, connect it to the gas supply line, and pressure check the system.

Piping Your Home for Natural Gas

Once the underground gas lines are complete, you must find a gas plumber to pipe your home for your natural gas installation. They will run the pipes from the meter to each outlet inside your home where gas is needed, such as appliances, furnace, and water heater.

Time to Install the Appliances, Furnace, Water Heater

Now time to install your appliances, furnace, and water heater. You can have the gas plumber do this, or you can yourself, based on regulations of the local municipality. We always recommend having a professional gas plumber complete your natural gas installation. They will check for any gas leaks or other issues and make it right. If you don’t have natural gas installation available, but you are curious about it, you’ll find it to be a cleaner way to cook and heat, and less expensive.  Appliance for natural gas is typically less expensive than electric appliances too! Let’s get started on your natural gas line installation in Mesquite, TX! Call the experts at James Armstrong Plumbing at (214) 414-3705.

Should you Repipe your house?

whole house repiping

How do plumbers repipe a house?

Repipe is what it says it is: replacing pipes in your home.  A whole house repipe job is replacing the entire plumbing system in your home. This is a large undertaking and will take, on average, three to five days to complete.

Once a whole house repipe job is completed, you will immediately notice the change in how the water flows, the water pressure, improved water bills, and less clogged pipes or leaks.  The best part of a repiping a house, it will last you forever. That alone can justify the house repipe cost and the time it takes for the job to be completed.

The first thing plumbers do before they start a whole house repipe job is to inspect all the plumbing to get an idea of how much and what type of materials are needed.  They have already done this have already when you were given an estimate, but they will examine the job again to verify this information.

As we mentioned earlier, the whole house repipe job will take between three to five days, depending on the size of the home and the age of the existing plumbing (older piping could take longer to remove). The water to the house will be turned off for a few hours each day while the plumbers are working. 

They will use plastic sheets to cover their work areas to prevent any harm to the house and the furnishings. They will make surgical-type cuts into the ceiling and drywall to gain access to the existing pipes. Once the whole house repipes job is completed, they will patch and smooth over the areas they had to cut into. Whether they repaint any areas will be something discussed with you during the estimate. Many plumbers have a third-party painter to come in behind them to do this type of work.

There may pipe that needs more extensive work, like a repiping house on slab requires excavation to gain access to pipes that were laid before they poured the slab. This sometimes requires removing major fixtures, which will be replaced as the job is finished up.

Do I need a permit to Repipe my house?

There are national codes for plumbing with the goal of standardizing the work performed by plumbers. There are also building codes and regulations for city, county, and state, which supersede any national codes.

Before having a whole house repipe job started, check with the local governing office where you are located and check if there are any building and plumbing codes or laws.  Experienced plumbers will know the codes and laws, and many will file for any permit for you. 

Large plumbing jobs like a whole house repipe job will require a building or plumbing permit before starting the work. Smaller plumbing jobs like changing out faucets or replacing the internal parts of a toilet usually do not, but it is wise to check with the local governing office first. Replacing a water heater or installing a new bathroom will probably require a permit.

Should I Repipe my house with PEX?

Most houses have copper pipes run to the main water line and waste lines, and whole house repipe jobs are replaced with copper in those areas. From your house to the main lines, they use plastic pipes for branching off to the fixtures inside your home. Whole house repipe with pex plumbing has become a popular choice in recent years for several reasons:

  1. Flexible piping makes installation easier
  2. Less expensive
  3. Don’t corrode or freeze

A drawback is the history of copper pipe is 50 years or longer lifespan. PEX has only been around 30 years, so it does not have a history to compare. To date, though, it is neck and neck with copper when compared.

Does Repiping a house add value?

A whole house repipe job won’t directly add extra value to your homes like a master bath or an updated kitchen would. However, it will bring it up even with market value, especially in an older house. An older house with original plumbing is a red flag for prospective buyers. While plumbing pipes should have a long lifespan, there really isn’t a way to assign a definitive timetable for a whole house repipe job. 

Other than you have a 100-year-old house with original plumbing, how do you know if your home could use a whole house repipe job? We have a list of six indications you should know in your home: 

  1. Aged and Unsafe: Besides the age of your house and its plumbing, the climate and the wear and tear are important factors. Another factor to consider is the type of pipes used in your house. Galvanized steel and lead piping need to be replaced due to their being unsafe. If the pipes in your house clack, clang, or rattle every time water is turned on, a whole house repipe job is needed. 
  2. Leaking Pipes: Replacing leaking pipes is common sense, but if you’re having to repair the same area of pipe repeatedly, a whole house repipe job may be the answer to your plumbing problems. 
  3. Corrosion: If you’ve noticed corroded pipes in your home, discoloring or flaking, indentations, and dents, it is time to consider having your whole house repipe.  A corroded pipe will be more likely to burst or leak if it hasn’t already. 
  4. Poor Water Pressure: Several factors can cause low or poor water pressure. The most common is caused by corrosion or sediment buildup. Both block water running through the pipe and unneeded pressures some areas of piping. A dishwasher, shower, or washing machine have little pressure are indicators a whole house repipe job could be the answer. 
  5. Discolored Water: If the water in your home comes out brownish, reddish, or yellowish from the spigots, you have major rust and sediment buildup and need a whole house repipe job.  If it is only when running hot water, this would indicate it is the water heater, not the whole house plumbing.
  6. Smell and Taste Bad: If the water tastes bad in your home or has an odor, the plumbing is likely on its last bit of life and a whole house repipe job is needed.
copper pipe pierced and leaking

What causes a pinhole leak in a copper pipe?

When copper plumbing gets old, it is common for pinhole leaks to happen on an increasing frequency. You may think that the leading cause for this is aging, but don’t be so quick to decide that. Another reason that has been determined by plumbers is the municipal water system has chloramines. If your water heater is getting old, it will start creating particles of corrosion which will begin eating at the pipe’s insides, causing pinhole leaks. Any house with copper piping would benefit from a whole house repipe job to eliminate the problem. If you’ve decided that you need a whole house repipe, get several quotes and compare them. You want to get a plumber that offers a warranty on their work, and the materials used. If you sell your house later, a whole house repipe will only help add to the value. 

Is it time for a whole house repipe in Mesquite, TX? Call (214) 414-3705 today!

What’s Clogged Drain?

Plumber Cleaning Sink With Plunger

Learn More About a Clogged Drain

pA clogged drain can be formed from a number of reasons and can often halt the progress of your day if severe enough. That’s why it’s essential to have your plumbing systems taken care of immediately when a clog forms in order to ensure smoother operations. A plumber may be able to remove obstructions with relative ease and quickness yet more severe issues may point to ongoing problems. Make sure to have your plumbing lines inspected for locations of leaks or other issues that may arise with a clogged pipeline. Until then, here is some general information regarding clogged drains that may be of use to you.

Why is my drain clogged?

Depending on the location, a clogged drain emerge with different things going down the drain that shouldn’t. On the basic level, over time skin flakes, dirt and sediment can stick to soap scum or other sticky areas along the pipe. Gunk accumulation is inevitable and will reduce the flow of water. It’s important to have your drains cleaned and unclogged when the time calls for it.

Clogged Drain With Hair

A clogged drain that has hair trapped is often the reason for clogs in the tub, shower or bathroom sink. Ultimately a plumbing snake, or DIY snake made with a wire hanger, can reach into the drain and pull out clumps of hair. 

Clogged Drain With Septic System

When items are flushed when they should be down toilets you may experience problems with sewer pipes or septic tank systems. Items to avoid include paper towels, disposable diapers, cigarette butts, sanitary tampons, non-biodegradable or anything plastic.

Clogged Drain With Garbage Disposal

Similar to septic tanks, anything that shouldn’t be going down the drain will cause a clog. A clogged drain with garbage disposal is particular with slimy objects, fibrous objects, hard objects, and fine objects. Such examples can include spaghetti, celery, fruit pits, coffee grounds, oil, potatoes peels, and others. 

Where is my drain clogged?

It can be rather difficult to find the exact location of clogs as pipes are out of sight. With new technologies, plumbing companies can track issues fairly quickly when it has to do with a clogged drain. As such, the first place to expect a clogged drain can be the bottom of the fixture’s trap. If not there it may be somewhere between the sink drain and branch pipe that it’s connected to as is often the case with showers, toilets, and tubs. finally, more often the clog will be in the sink trap.

Can a clogged drain cause a leak?

A clogged drain can cause pipes to overflow and back up. With cracks in caulking or pipe threads you may see that this building pressure will exacerbate these preexisting issues to where a leak can emerge. With aging pipes, these conditions can be hidden yet prevalent, not emerging until damage has become extensive although the internal chronic water damage has already been there.

Clogged Drain Cost

A clogged drain may cost differently depending on the severity of the clog and where it may be. With bathrooms and kitchens, you may see a range of $109-$214. A laundry drain could run from $151-$214 while a toilet clog could be anywhere from $109-$273.

What can I pour down a drain to unclog it?

A safe remedy to use can be a mixture of water with vinegar and baking soda. Ultimately pouring drain cleaners can cause internal damages to the pipe due to reactive chemicals. This will prematurely damage piping and down the line cause leaks or pipe replacements.

What acid do plumbers use to unclog drains?

Some plumbers may choose to use a solution of muriatic acid to clean clogged drains. As this acid is more specifically a kind of hydrochloric acid solution it should be used with great care and caution to avoid damage.

Clogged kitchen sink with standing water

How do you clear a completely clogged drain?

  • Use boiling hot water and pour that down the drain.
  • Wait a few minutes and add vinegar and baking soda mixed with water.
  • Pour that down.
  • Wait 15 minutes.
  • Pout hot water again.
  • Other methods:
    • Drain Snake
    • Plunger

Get Help With a Clogged Drain From a Professional Plumber

There are many methods out there to remove problems from a clogged drain. It’s best to reach out to a professional plumbing company when issues with a clogged drain emerge. Get the help that will be quick and thorough with a trained plumber and have the process of finding and determining the severity of clogs simplified for you. Make sure to avoid incorrect objects from being disposed of in all locations of your property in order to save yourself from clog headaches. Speak to your local plumbers today to see what can be down with your clogged drain.

If you require assitance with a clogged drainin Mesquite, TX call (214) 414-3705 with James Armstrong Plumbing!

How to Repair Sink Leak

A Plumber Makes a Repair Under a Sink.

How to repair sink leak

From dripping faucets to leaking pipes, sink leaks are more than a nuisance. A leaking sink can cause water damage to cabinets and floors or could be a sign of another problem like a clog. No matter how severe the leak, make sure you get the sink repaired quickly to avoid further damage. If you have the skills and right tools, sink repair is something you can do yourself.

Here are some different leak repairs you can do yourself.

  • A dripping faucet is often caused by loose compression fittings on the shut-off valves. Tighten them by holding the valve with one wrench, while turning the compression nut with another.
  • Use adjustable or locking pliers to tighten faucet connections located in cramped spaces behind the sink.
  • A leaking faucet may also need to be disassembled and gaskets and washers replaced.
  • If drain leaks can’t be stopped by tightening the compression nuts, it could mean the pipe or trap is clogged. A metal trap may be corroded. Remove the trap and clean it or replace it if it’s corroded.
  • Use an auger to clear the clogged drain pipe.

If you don’t have the right skills or tools to make a repair, or want to make sure the sink repair is done right, you want to call in a reliable professional like James Armstrong Plumbing. We provide a full range of plumbing fixture repair services in Mesquite, TX. Call us today at (214) 414-3705 for fast, effective repair services.

How much does it cost to fix a leaky sink?

Sink repair will vary in cost depending on the type of repair made. The average sink repair cost is $194. A leak repair will cost between $110 to $170. Other common repairs include unclogging drains or replacing the sink or faucet. Clearing a clog costs anywhere between $150 to $200, while replacing a sink or faucet may cost anywhere between $150 to $400, not including the new part.

How do you fix an old sink?

If you’re remodeling and have an old porcelain enamel sink, you may not have to replace it. Instead, you can refinish it using an enamel repair kit. This can be a time-consuming—and dusty—task because you have to wait for multiple layers of paint to dry. But, the resulting work can be worth the time.

You’ll have to shut off the sink’s water supply, clear the water line and then remove the faucets and drain assembly and then follow the steps below. Because the work is dusty you’ll want to open windows for proper ventilation, cover the work space with plastic, and wear a dust mask. 

  • Clean the sink thoroughly before you begin to remove the top layer of the sink with a palm sander. All the enamel won’t be removed. You just need a smooth surface. 
  • Remove the top layer with a palm sander, vacuum away the dust, and apply a bonding agent.
  • Let the bonding agent dry and apply an acrylic primer with paint sprayer. After about 30 minutes add a second coat of primer.
  • After the primer dries, use the paint sprayer to apply urethane enamel. Spray on three coats, letting it dry for about 30 minutes between coats.
  • Allow the paint to cure for 48 hours. 

Can a ceramic sink be repaired?

Although attractive, ceramic sinks can easily be chipped. Ceramic sink repair is possible. If you are wondering, “How do you fix a chip in a sink?,” the repairs are fairly simple and can save you from replacing the sink. All you need to do is to clean the sink and sand the damaged area before applying a repair compound. Follow up by applying touch-up paint.

What causes hairline cracks in sinks?

Hairline cracks are a common problem on porcelain sinks. Once the cracks happen, there’s not much you can do except sink repair. If you want to prevent further cracks from developing, you need to know what causes them in the first place. Really drastic temperature changes will cause cracks. For instance, if your sink is really cold and you pour really hot water in it, the heat will create temperature stress and cause a crack. Another problem that causes cracks is heavy dropped items. Although porcelain is tough, a hard impact will crack it. In fact, hard impacts can cause cracks.

Do sink repair kits work

While cracks and chips can happen in porcelain and ceramic sinks, you don’t have to despair. You can buy a sink repair kit to make repairs. You can make the repair yourself, though it will take patience and steady hands, as well as about 24 hours. The kits usually contain an enamel epoxy. Some may contain touch-up paint, though usually you need to purchase paint separately. If a crack is minor, you may only need the touch-up paint. 

A Leaking Faucet

Sink repair near me

If your sink has a leak or is damaged and you need reliable sink repair in James Armstrong Plumbing, the professionals to rely on are those at James Armstrong Plumbing. We provide a full range of fixture repair services for your home. Schedule services with us by calling (214) 414-3705.

What is Tankless Water Heater and How Does it Work?

tankless water heater in the bathroom

Learn More Regarding A Tankless Water Heater

There have been many advancements with appliances that use utilities with the effort of energy efficiency and water conservation being an important issue. In order to remedy the issues of tank corrosion and water quality that can become damaged because of this tankless water heaters have been invented. There are a variety of models in the market today that come in different sizes and capabilities so it’s important to take the time to conduct research. Ultimately a professional plumber will be able to provide a recommendation based on your property’s specifications and needs. Here is some information regarding a tankless water heater that may prove useful to you before you call your local plumbing company.

How does a tankless water heater work?

A tankless water heater works automatically when the hot water tap is turned. What happens is that cold water will travel through the pipe and into the unit with either a gas burner or electric element heating the water. This hot water will then travel directly to the room without the use of a storage tank which results in a tankless water heater being able to deliver a constant supply of heated water.

How many years does a tankless water heater last?

A tankless water heater is expected to last 20 years or more. As parts are easy to replace this can extend life by more years as well. This is a better life span than storage water heaters these last typically around 10-15 years. A  tankless water heater, in turn, lives longer as it can avoid the standby heat loss that’s often connected with tank storage heaters.

Are tankless water heaters more energy efficient?

With a tankless water heater you can expect it to be 24%-34% more energy-efficient than standard water heaters that use 41 gallons or less of hot water on a day-to-day basis. According to if you install a  tankless water heater at each hot water outlet you can increase energy saving by up to 27%-50%.

Can tankless water heater heat whole house?

A tankless water heater can heat most single-family homes yet you may need to determine the proper a tankless water heater size necessary for your property. Keep in mind that some tankless water heaters can be smaller and less expensive than a furnace or boiler.

What size tankless water heater do I need?

You can determine the right size of your tankless water heater by knowing the maximum number of devices you want running with their total flow rate. Once you add up the flow rates at gallons per minute you’ll be able to determine the needed flow rate you’ll incorporate for a demand water heater.

automatic water heater on white background tiles

What is the best tankless water heater on the market?

  • Rheem RTEX 13 Electric Tankless Water Heater
  • Stiebel Eltron Tempra Plus 24 kW
  • Rinnai RUC98iN Ultra Series, Concentric/Twin Pipe Installation
  • Atmor AT-D18TP-AZ Instant Tankless Water Heater
  • Ecosmart ECO 27 Tankless Water Heater
  • Rheem RTGH-95DVLN Direct Vent Tankless Water Heater
  • Eccotemp FVI-12-LP Propane Tankless Water Heater

What is the average cost to install a tankless water heater?

A tankless water heater will cost anywhere from $500-$2,000 dependent on the model you choose. What’s more installation costs can be added to the final amount. With that in mind, the average cost can run around $1,500 on average.

Does a tankless water heater increase home value?

Homes with a tankless water heater have been found to sell 4% more than their anticipated value.

What is the downside of a tankless water heater?

The disadvantages of a tankless water heater can consist of certain models not being able to simultaneously provide enough hot water simultaneously like with both shower and laundry. Yet others can be able to be used at once with multiple points of use. With a gas-powered unit you may have pilot lights that will ultimately waste energy. Although conventional water heater has pilot lights as well it’s not really wasted as the pilot would heat the water in the tank of tank units.

Is a tankless water heater worth it?

It’s important to weigh the pros and cons of a  tankless water heater unit as with all kinds of appliances. Although the initial cost of a  tankless water heater will typically be higher than standard tank models they will save you money in the long run from preventing repairs and tank corrosion. 

Contact a Professional For Assistance

If you’re interested in learning more about a tankless water heater or would like a tankless water heater installation be sure to get in touch with a professional plumbing company for more information. A professional technician will be able to discuss options with you and determine what type of unit would match your property’s specifications. What’s more, they’ll be able to determine id a gas or electrical unit can run with your existing utility lines. For assistance with other home improvement services like with wood gate installation get in touch with the necessary avenues for more. Get started with a tankless water heater and save on energy and water use.

If you’re interested in a tankless water heater in Mesquite, TX call (214) 414-3705 with James Armstrong Plumbing!

Is a Sewer Inspection Necessary?

A Plumber Sets Up a Sewer Inspection Camera.

Is sewer inspection necessary?

Whether you already own a home or you are planning to buy a home, you might want to consider a sewer inspection, which is a simple process using a sewer inspection camera. Even if you aren’t having any issues with your sewer lines getting an inspection should be a part of your regular plumbing maintenance.

With a quick and easy camera inspection, you’ll be able to find out if there are any leaks or damages to the sewer line that need to be repaired. The sooner you find issues like leaks, the better. Letting repairs go unchecked for too long could lead to costly repairs or replacement later on. Because sewer lines are underground, one particular problem is tree roots that can get into your sewer lines and over time expand and cause blockages that can cause major problems, and often require the pipes to be replaced. An inspection allows you find out if have problems with tree roots and deal with it quickly and effectively.

If you are buying a home, a sewer camera inspection should be included with your overall home inspection. You don’t want to discover after you’ve bought the house and settled in that it has major problems with the sewer lines. With an inspection, you may be able to get the seller to repair any problems or negotiate the price if problems in the sewer line exist.

Sewer camera inspections are quick and effective ways to ensure your sewer lines are free of problems. Give the experienced team at James Armstrong Plumbing a call at (214) 414-3705 to schedule an inspection today.

What is sewer camera inspection

Using a specially designed waterproof sewer inspection camera, plumbers are able to snake the camera through your sewer lines to check their condition. With a sewer camera inspection, a plumber can get a real-time video feed from the line and detect problem areas such as leaks or blockages from debris or tree roots. The cameras are attached to flexible lines and can go anywhere you have piping, including underground or behind walls. Inspections are especially useful as part of regular plumbing maintenance or when buying a home.

Drain and sewer camera inspections

Sewer inspection cameras aren’t used just for sewer line inspections. Today, for plumbers video cameras are as valuable tools as wrenches. Besides being able to find leaks or blockages in your sewer lines, cameras can be used throughout your plumbing system. They are especially effective at finding clogs, in particular when it comes to underground pipes of any sort, including under the foundation.

Foundation problems are a big concern when it comes to plumbing. A plumbing leak that forms under your foundation can cause major problems including a foundation shift. Your foundation can also be affected if you don’t have a good way to drain water off your roof and away from the house. Damaged or clogged gutters can affect drainage and require gutter repair and installation services to come and clean or replace them.

Cameras give plumbers a real-time look at your plumbing lines, so any problems can be assessed immediately. For instance, when they detect a clog deep in a drain line, they can quickly determine the best course of action to clear the clog.

How long does a sewer inspection take?

The length of time it takes for a sewer inspection can vary. Some can take as little as five minutes, not including set up time. The inspection could take longer if any problems are detected. Much of time required will depend on how much piping is present.

How much does a sewer camera inspection cost?

When you get a sewer camera inspection, expect to pay anywhere between $226 and $791. In some instances you may end up only paying around $100, depending on the service. You may wonder if you want to do the inspection yourself, “Can you rent a pipe camera?” Yes, there are services available that allow you to rent a sewer inspection camera. Rental costs about $200. Using a sewer inspection camera can be complicated, however, so you may want to hire a professional for the job. 

What is the best sewer camera?

There are several sewer inspection cameras on the market today, and can cost anywhere between $90 to more than $3,000. Different cameras have different roles and uses. Plumbers may use one of three basic types of sewer cameras, depending on what kind of service they’re performing.

Types of sewer inspection camera

  • Push cameras: These cameras are the simplest, and the ones plumbers use for basic checks, such as when you know which pipe has a problem. The cameras are attached to flexible lines and pushed through the pipes.
  • Lateral launch cameras: With these cameras, a secondary camera can be launched from the primary camera to explore pipe branches. The plumber can inspect the entire system with this type of camera.
  • Crawlers: These are cameras that are mounted on motorized wheels, and can change angles to examine pipes more thoroughly. These cameras often give plumbers greater visibility.
A Camera Inside a Sewer Line.

Sewer camera inspection near me

If you need a sewer line inspection using a sewer inspection camera in Mesquite, TX, get help from the experienced professionals at James Armstrong Plumbing. Our inspections are thorough and effective. Schedule us today by calling (214) 414-3705.

What Are the Signs of a Gas Leak in Your Home?

Gas Stream Leaking From an Industrial Pressure Gauge

Become Aware of Gas Leaks

We have heard about the risks of gas leaks, yet when it happens we may not know what to do. It’s important, perhaps more than other systems of a home or business, to pay particular attention to the appliances that use gas as well as the gas line that connects to them. In regions where earthquakes or storms are more regular, you run the risk of having them aggravated or disrupted which can spell disaster if a gas leak is strong. Be sure to get your gas line inspected if you suspect trouble after a storm. If there is a gas leak present vacate the premises before calling for help. In order for you to be more prepared in the future with the possibility of a gas leak, here is some helpful information regarding gas leaks signs, what to do when it’s present and how a gas leak may affect your health.

Why do gas leaks happen?

A gas leak can occur for a number of reasons. They are usually triggered during an earthquake with pipe connections being loosened or during occasions where there are damages like to a gas pipeline. Such cases can be fallen debris or another impact that can puncture the pipe causing it to leak out gas through a new opening.

When is a gas leak dangerous?

A gas leak is dangerous during an earthquake or in a place of business as there are more scenarios of aggravating or impacting a gas line (with earthquakes) or the use of electricity in an area of heavy gas levels that can spark a fire (in a place of business.)

Is a gas leak dangerous?

A gas leak can be dangerous in that a gas leak can cause the potential of sparking a fire. What’s more, if you are exposed to it for too long it can cause brain damage from unhealthy exposure to carbon monoxide.

Can a gas leak make you sick?

A gas leak can run the risk of carbon monoxide poisoning which features a number of symptoms emerging. Gas leak in house symptoms, or really any location,  can range from dizziness to nosebleeds and in some cases can cause you to pass out.

Can gas leak cause dizziness?

A gas leak can cause you to feel dizzy, lightheaded, have pain in your chest, ringing ears, breathing difficulties, nosebleeds and more. That’s why it’s best to vacate the premises beyond ventilating rooms as a solution if you realize any additional abnormalities or signs of a gas leak. Be sure to do some investigating to see if more signs point towards a gas leak.

Large White Gas Line Outdoors on Roof of Industrial Roof

Signs You Have A Gas Leak

  • The Smell of Rotten Eggs
  • Hissing or Whistling Noises
  • Yellowing Foliage
  • Floating Leaves/Water Droplets
  • Damaged Pipe
  • Cloud or Dust Near Pipe
  • Lightheadedness
  • Breathing Difficulties
  • Nosebleeds
  • Ringing Ears
  • Pain in Chest

What would a gas leak smell like?

As gas is naturally odorless, gas companies have incorporated the use of odor additives to trigger the olfactory (sense of smell) recognition of gas. This additive smells of sulfur or rotten eggs, so when you smell this odor you will know a gas leak is most likely present in your immediate area.

What do you do if you suspect a gas leak?

When a gas leak occurs you may not know what to do. It’s important to first stay calm and vacate the premises without interacting with any electrical devices on you, attached to a room or with an appliance. Anything can spark a fire when a gas leak is high enough levels in the air. Even turning off a computer of switching on a light can spell danger. What’s more, using a cell phone is not recommended until after you’ve left. When you leave the room leave all doors you go through open to allow for more chance of ventilation. Do not turn lights or computers off.  Be sure to make the call for help a good distance away from the building. Once outside first call you make if there is a fire is to call 911. If there isn’t a fire, call your gas company first to shut off your gas supply, after this is done contact a plumber for repairs. The reason to call separately is that these two entities act separately in the process of fixing a gas leak.

Contact A Professional 

It’s important to know the signs and symptoms of a gas leak before it occurs as it can be detrimental to the health of all occupants of a property. Be sure to get in touch with a professional for your gas line repair in Mesquite, TX so you can get the help that is necessary for a safe gas line. For questions on other home systems, like with silicone roof coating, be sure to reach out to the relevant avenues for assistance. In the case of a gas leak, perhaps installing a gas leak detector to your property may be helpful. These detectors can detect a range of gas types and can trigger shutting off your gas line when unnatural amounts of gas are detected in the air. As with any product, be sure to consult a professional for advice and guidance. 

If you’re needing assistance with a gas leak in Mesquite, TX call (214) 414-3705 with James Armstrong Plumbing! 

How Do I Know If My Water Heater Is Efficient?

Modern Electric Water Heater on a Marbled Concrete Wall

Make Improvements With Your Hot Water Heater

Be it with your home or business receiving hot water is essential for comfort and use. Your hot water heater is often placed in the background of home systems in favor of say energy efficient HVAC systems or other such systems. Yet an energy efficient hot water heater has been on the forefront of many a home or business owner due to the draw of saving on utility costs and getting hot water faster and at multiple locations without sacrificing a limit. With all the innovations out there your choices in an efficient and reliable hot water heater are numerous. A great way to determine which model will be right for your property is to get into contact with a professional who can determine based on your energy/water usage what hot water heater will be right for you! Here is some information to take into consideration when in the process of selecting a hot water heater for your home or business.

Are old or new water heaters more efficient?

As with any appliance, electronic or other items, as time passes so do improvements due to new discoveries. A new hot water heater will be more efficient than older ones as the Department of Energy has changed regulations in order to make present models more likely to offer energy savings.  

How to Determine Water Heater Efficiency

A good way to determine the efficiency of a water heater is to consider the energy factor (EF) of a hot water heater’s overall energy efficiency based on how much hot water is produced per the unit’s fuel consumption over a given day. With the innovations out there today many are choosing to go tankless in their hot water heater selections. Not only will tankless options get rid of the risk tank corrosion and periodic maintenance but it will improve water-energy efficiency due to having availability on an as-needed basis. 

Home Electric Water Heater Boiler

Do water heaters lose efficiency?

Signs of Loss of Efficiency

  • Rusty Water
  • Rumbling & Noise
  • Leaking
  • Age

How often should you replace water heater?

Most hot water heater lasts between 8-10 years with 10 years being the age that it’s recommended to undergo replacement. However, the actual need for it could arise after this time as well.

How much should it cost to replace a water heater?

The costs of a hot water heater installation can range from $500-$1,000 with such factors as size and type changing the rate. As far as hot water heater installation cost it will depend on both the cost of the appliance and labor which can differ by manufacturer and the plumbing company you choose.

Hot Water Heater Efficiency Gas vs. Electric

Hot water heaters can differ in efficiency based on type, with gas vs electric water heater efficiency comparison it’s really up to you on whether the pros and cons outweigh one another for both. Although gas water heaters are cheaper to operate they cost more upfront then their electric competitors. What’s more, they make up the difference after a year of use with gas heaters costing around $300-$600 while electric costs $250-$500. If you don’t have a natural gas line then costs will probably add up. As of such, electric water heaters are easier to install and replace, less expensive to purchase and safer in that there won’t be a risk f gas leaks or an explosion in a worst-case scenario situation. As far as energy efficiency, it would probably go to an electric hot water heater since gas hot water heaters lose heat through venting.

What is the most efficient electric water heater?

The most energy efficient hot water heater is undoubtedly electric. Electric hot water heaters are designed to give you increased performance, as of July 2019 the most efficient tankless electric hot water heater has been deemed to be Stiebel Eltron Tempra Plus 24 KW a German design that is able to work both in cold and warm climate homes. The advantage of this design is that it comes with an impressive microprocessor which doesn’t face fluctuations in water temperatures or pressure when having a high demand for hot water. You also won’t need any venting with this model and can hang anywhere without producing air pollution. It can fit in tight spaces as it’s a compact size and with its digital temperature control you’ll have easy access to manage temperatures.

Contact A Professional

As with any product or appliance that will improve your home or business operating systems be sure to get into contact with a professional. Only they will be able to keep up with codes and regional requirements in order to ensure purified and well working hot water heater systems. You can also go over your many options in models and types to see which ultimately fit with your preferences. Get an energy efficient hot water heater system and save on utility costs while having more ease of use!

If you’re interested in a hot water heater in Mesquite, TX call (214) 414-3705 with James Armstrong Plumbing! 

How to Find a Plumbing Leak

An Active Plumbing Leak in a Copper Pipe

Hunting for the Source

Have you ever stumbled upon a terrible plumbing leak inside your home? The rising moisture and potential water damage can be pretty overwhelming. However, it’s the hidden leaks that often cause the greatest damage in your home.

Today, we’ll explore the easiest ways to uncover and treat leaks within your home. After reading through, you should be well prepared in the event another leak pops up in the future. Let’s get started!

Isolating the Plumbing Leak

Before repairs can get underway, you’ll have to find the source of the water loss. If homeowners can figure out the cause behind the damage, they’ll be much better equipped to choose a lasting solution. Unfortunately, not all plumbing leaks are easy to spot. This can lead to some unpleasant surprises on your monthly water bill!

Here’s how you can begin your quest to discover that leaking pipe. Remember, fast repair makes all the difference between minor water loss and extensive restoration work. If you can’t locate the damaged plumbing in a timely manner, talk with a local plumber about arranging leak detection.

Cursory Search

Initial Search – Look and Listen

As you search for the leaking pipe or connection, you’ll need to use both your vision and hearing to spot it. Turn off all water appliances and take a walk through your home, listening carefully for the sound of running water. If you don’t find anything after checking each room, try taking a cursory look around outside too. Should the leak still evade detection, it’s time to conduct a more thorough, step-by-step elimination process.

Step by Step

The Process of Elimination

For this approach, you’ll need the water meter and a second person to help. If you shut off all the appliances and fixtures in your home and the meter still spins, you definitely have a leak. If you turn off the water supply to the main line and the meter stops, that confirms the leak is on your side of the meter.

Here is the step by step process to find the plumbing leak.

  • Step #1: Have your helper watch the meter dial as you systematically turn off each water valve.
  • Step #2: Confirm the leak is on your side of the meter by shutting off power and watching the dial.
  • Step #3: If you have a separate valve for the irrigation line, shut off the valve and see if the meter stops spinning.
  • Step #4: Test the hot water side of your plumbing by turning off the valve at your water heater.

As you turn off each valve, ask your partner if the meter dial continues to spin. If the meter stops when you turn off the valve, you confirm that the leak is located somewhere further down that line. Let’s say you get all the way to turning off the hot water side of your plumbing and the meter stops, you’ve confirmed the leak is located on that side.

Professional Work

What is Plumbing Leak Detection?

This is the process by which plumbers look for leaks in your home. How do plumbers check for leaks? They often begin with the process of elimination shown in “Step by Step”. Once the problem is isolated to the hot or cold line, finding it usually becomes fairly simple. For those leaks especially challenging to locate however, plumbers utilize special equipment that detects the presence of excess moisture.


How Much Does a Plumbing Leak Cost?

According to Homeadvisor, you can expect to pay an average of $150 to $350 for basic plumbing leak repairs. Leak detection may add another $100 to $200. If the damage is located in your main line however, that total could climb as high as $4000 for new piping. Don’t let these numbers scare you from getting a professional estimate however, which may be lower than the national average.

What Causes Leaking Pipes?

There are all kinds of hazards that may cause your pipes to break down, from long-term corrosion to rapid spikes in pressure. Pipes rarely fail overnight however, as most problems are caused by years of slow degradation. Below are some brief insights on the most common threats.

Internal Hazards

Can a Clogged Pipe Cause a Leak?

Severe blockage is the bane of many otherwise healthy pipes. As clogs grow denser, outward pressure builds until the pipe ruptures from the stress. So yes, clogs do cause leaks (eventually).

External Threats

What Causes Water Lines to Break?

Main water lines are built tough. That means that it requires a lot of physical force or decades of slow degradation to break them. Watch out for ground shifts, invasive tree roots, and old age as the primary causes of damage. Of course, misplaced digging could also rupture the line.

Temporary Fixes

How Do You Temporarily Fix a Leaky Pipe?

Try using either a sleeve clamp or a c-clamp to stop the leak while you wait for a professional. Check out this helpful guide on temporary patches!

Rusty Pipe Segments Examined After a Plumbing Leak

Call for Plumbing Leak Detection and Repair!

Need professional help for a stubborn plumbing leak in Mesquite, TX? Our team at James Armstrong Plumbing would love to help you. We provide cost-effective and long-term relief for homeowners throughout the local community. Call (214) 414-3705 and schedule your busted pipe repair today!