Pipe Leak Repair & Repiping in Garland

Standard 3-bed/2-bath residential whole-house repipes run $4,500 to $9,500 for PEX and $8,500 to $16,000 for copper. Actual cost depends on home size, number of fixtures, access, existing material, and whether drywall repair is included in the quote or coordinated separately. On-site evaluation gives an accurate quote for your specific home. The number on the quote is the number on the invoice.

PEX whole-house repipes typically take 3 to 5 days from start to system pressurization. Copper whole-house repipes typically take 5 to 8 days. Larger homes or homes with limited access can extend either timeline. Water is shut off during specific portions of the work with coordinated shutoff windows so household disruption is minimized. Timeline included in the written quote before work begins.

Repair if the leak is isolated to a single point and the rest of the plumbing system shows sound condition on inspection. Section repipe if the affected run has multiple issues but the rest of the home is viable. Whole-house repipe if multiple leaks in different areas confirm systemic material failure, if the home has original 50-70 year old galvanized supply, or if water quality and pressure issues affect the whole home. On-site evaluation drives the honest recommendation for your specific situation.

Both materials offer 50+ year service life under DFW conditions. PEX costs less to install, handles freeze conditions better, and requires less wall access. Copper has a longer proven track record and better appearance on exposed runs. Most Garland residential repipes use PEX for concealed runs. Choice depends on access, budget, and homeowner preference — we recommend based on what fits your specific home, not what's cheapest for us to install.

Not usually. Water is shut off during specific portions of the work with coordinated windows planned around household needs. Overnight water availability is maintained on most jobs. For homes with elderly residents, medical requirements, or other constraints, we can coordinate hotel arrangements or extended shutoff planning. Discussed and planned before work begins.

Age is the strongest indicator — homes built between 1930 and 1980 in Garland were commonly built with galvanized supply. Visual inspection at exposed points (water heater connections, under sinks, in utility rooms) shows the material: galvanized is gray, threaded at joints, and often shows exterior rust or scale after decades of service. Copper is reddish-brown with soldered joints. PEX is flexible plastic tubing, usually red for hot and blue for cold. On-site inspection confirms material throughout the home.